The AT2E ADATMV5-S On line Automated Torque Tester is a quality control system which has been designed for connecting to the production lines to carry out the automatic torque control and provide measure data for instant inspection. The system was developed base on our torque control experience over 25 years, with the aim to CANCEL operators’ influence factors so as to provide the optimal torque control with more accurate and reliable results and better reproducibility.
Besides the regular torque inspection, the ADATMV5-S is able to perform the non-destructive inspection which is not possible to achieve by manual inspection. With non-destructive inspection, the seal integrity of the product is still intact and no microbial contamination risk.
The system can also be installed in the laboratory as a semi-automatic torque control system with manual sample installation.
Customize screen display and cycles are available, flexibly for different control requirements.
Technical specifications:
CFR21-11 / FDA compatible
Free operator torque controller ( on-line )
Legal weighing control suitable in option
Secure seal test suitable ( automatic bubble point control )
Using by touch screen
Measures in opening and closing directions
Measuring range: 00.00 to 99.00 Kgf.cm
6 measuring cycles: Torque closing / Reach position / Release + break / Release + break + over screw / Non-destructive test /– MORE ON REQUEST
Units: Kgf.cm / Inch.lbs / N.cm / N.m
Rotating angle & speed adjustable under certain cycle
Accuracy: ±0.5 % of full scale
30 products memory
10 thresholds (limits) option
10 operators memory
Configuration by protected password (administrator)
Memorization up to 100 measures
Dynamic display: statistics / hour / date
Display: product name / operator / batch N° / line N°
1 RS232 output and 1 printer output (software & printer)
Language: English / French / Chinese
Delivered with calibration certificate accord with ASTM/ NIST/COFRAC/ DKD ENAC / UKAS
Easy-fast selector for cycles
Customized cycles
Special pneumatic chuck available
Auto-mode (Automatic start-stop detection system need to be equipped)
Special auto mode with head number – filler storage
Special multi format system for both bottle and preform
Dynamometric system
AC 220V (AC 110V optional)
Automated part:
Safety door
Automatic zero before restarting cycle
Settable height of column for all samples
Mechanical specifications:
Stainless steel Frame
Choice of measuring chucks: Beverage / Cosmetic / Pharmacy
Dimensions: 1075 (L) x 590 (W) x 1390 (H) mm
Weight: 120 kg
Mini printer
QUALITORQ Software
Customized display & cycles
Calibration pack
Dynamometric system
Automatic start-stop detection system
