PTG-1 Plate Thickness Gauge

PTG -1 Plate Thickness Gauge is for quick checking of the thickness of plates.

Easy-operation design offers a fast and accurate measurement of the plate thickness.

In order to avoid the manual recording error, the gauge can be connected to SPC system or AT2E “SeamCheck” software with DTB-1 Data Transporting Box and cable. So that, the data can be transferred to SPC system or “SeamCheck” software through DTB-1 and cable.

details

FWG-1 Flange Width Gauge

FWG-1 Flange Width Gauge is used to measure the flange width of empty cans.

Easy-operation design offers a fast and accurate measurement of flange width.

In order to avoid the manual recording error, the gauge can be connected to SPC system or AT2E “SeamCheck” software with DTB-1 Data Transporting Box and cable. So that, the data can be transferred to SPC system or “SeamCheck” software through DTB-1 and cable.

details

ECDG-1 End Curl Diameter Gauge

ECDG-1 End Curl Diameter Gauge is for quick measure of the Curl Diameter of ends.

Easy-operation design offers a fast and accurate measurement of the Curl Diameter. For each end type, a corresponding calibration block will be supplied along with the gauge.

In order to avoid the manual recording error, the gauge can be connected to SPC system with DTB-1 Data Transporting Box and cable. So that, the data can be transferred to SPC system DTB-1 and cable.



details

CG-D Countersink Gauge

CG-D Countersink Gauge is a digital gauge for measuring countersink depth of can and end. For fast and easy measurement, the zeroization base is equipped.

In order to avoid the manual recording error, the gauge can be connected to “SPC” system or AT2E “SeamCheck” software with DTB-1 Data Transporting Box and cable. So that, the data can be transferred to “SPC” system or “SeamCheck” software through DTB-1 and cable.



details

SLG-1 Seam Length Gauge


SLG-1 Seam Length Gauge is for quick measure of the Seam length (Seam height)

Easy-operation design offers a fast and accurate measurement of the Seam length (Seam height).

Reliable design, invariable measuring pressure and measuring angle which enable the operators perform the measurement accurately. The can body was aligned vertically, measurement results are more reliable. Applicable for different types of cans.

In order to avoid the manual recording error, the gauge can be connected to SPC system or AT2E “SeamCheck” software with DTB-1 Data Transporting Box and cable. So that, the data can be transferred to SPC system or “SeamCheck” software through DTB-1 and cable.



details