Test Equipment | Packaging Control
Quality control apparatus for packaging and beverage, agro-food, pharmaceutical, cosmetic, chemical and other industries.
AT2E is particularly specialized in torque measurements (TORQUE TEST), leak tests (LEAK TEST – BUBBLE TEST) pressure tests, vacuum tests, leak tests, force tests (PUSH AND PULL TEST) traction compression crushing stretching, tearing (C02) pressure, vacuum, but also in the tests of resistance of the packagings: explosion, bursting, swelling, deformation (BURST TEST GLASS, BURST TEST PET) resistance to axial forces (TOP LOAD TEST).
In addition, AT2E also offers a wide range of dimensional measuring devices: Perpendicularity of bottles and preforms, thickness measurement by probe or thickness measurement using a magnetic ball (HALL) method, height measurement, concentricity, control Of the boxes, diameter control.
AT2E offers you the essential instrument for the analysis of your distribution of the material at blowing: the cut bottle with heating wire (HOT WIRE BOTTLE CUTTER)
Finally, because of its experience in these fields, AT2E is at your disposal to advise you in carrying out the tests.
Our range consists of 7 large families that you will find in our pages
TORQUE TEST
The torque tester (also called torque meter) is available in two configurations: manual or automatic (automatic for consistent performance with reduced operator influence). Range TMV and ADATMV
The ADATMV, as an option, can also perform a Cork extraction test.
For packaging lines, we offer two control systems for couples control and calibration checks. The BT ETA TORQUE (Bottle torque control for screw head, wireless) and the BT ETA 5 (with wire and remote display). We also provide online/inline and stand-alone systems for TORQUE CONTROL in our starwheel system.
LEAK TEST
VACUUM LEAK TESTERS include the models ECO VLT, VLT D PLC and VLT. These devices perform tests in a vacuum or pressurization test for bottles, pouches, jars, vials and blister packaging, among other types.
VISUAL LEAK DETECTION
Bubble test instrument. Pressurized space (Head Space) between the liquid and the cap increases until the test product reveals a leak.
The ECO SSA, SSA D and SSA PLC (secure seal analyzer) are configured in three types of devices from very simple to the more sophisticated unit to perform your tests.
TEST OF RESISTANCE TO COMPRESSION OR STRETCHING – PUSH PULL TEST – TOP LOAD TEST
We offer analog and digital dynamometers that can be used independently or fixed on test benches, manual or motorized. These devices perform peel tests, push tests or pull tests on all types of packaging.
The TCT-2 is a multifunction model usable via touch screen. It is an ultra-modern and easy system to use for compression and pulling tests.
We offer two devices specifically designed for the online/inline measure placed under screwing or seaming heads namely the BT ETA FORCE (wireless) and the BT ETA FORCE SHF (wired and with remote display). These devices are delivered with a custom bottle or can shape and used for control support.
PACKAGING RESISTANCE TEST
The Burst testers, for PET (PBBT) and for Glass (GBBT) are available in single and dual-position. They control the pressure to expand and / or explode PET and glass. The device has a very intuitive touch screen, a sleek design, and is extremely easy to set up cycles in detail. The instruments include software for storing and managing the statistical results of your tests.
In addition we offer the BTLT (Bottle Top load tester). This device can perform the test of resistance to pressure (down-force) vertical deformation to rupture. The suggested maximum force is 2200 kgf.
MEASUREMENT OF PRESSURE, INTERNAL VACCUUM and CO2
AT2E offers two types. of equipment in this family:
Measuring devices for CO2 by pressure – temperature method. A simple device that pierces the sample and performs a stirring motion to stabilize the CO2. During the piercing a probe measures pressure (and temperature as an option). CO2 content is then calculated using corresponding tables.
CO2 Tester models offered: CO2 easy, CO2 DM, CO2 DA and CO2 AA.
PVT pressure and vacuum testers perform internal pressure, vacuum level measurements.. These devices are equipped analog or digital gauges for measuring the internal pressure levels of packaging.
DIMENSIONAL MEASUREMENTS / PERPENDICULARITY
Our instruments for measuring the perpendicularity can be adapted to your packaging:
Our PPG, (analog or digital versions) measure the perpendicularity of preforms.
The UBPT is for measuring the perpendicularity of PET or glass bottles.
These devices are available with an optional calculator interface.
These devices are equipped with digital height gauges (measuring the height of the packaging)
The PTG measures the thickness of the pre-forms.
The BTG measures the thickness of glass bottles.
AT2E now offers modern meter of packaging thickness with a very high accuracy (0.001 mm). The AMTG (Accurate Magnetic Thickness Gauge) This device for thickness measurement uses the method of magnetic radiation (Hall effect). Simply insert a steel ball (supplied by AT2E) in your package and with the help of a magnetic sensor, the measurement is performed. The data can be stored and uploaded to a personal computer.
ANALYSIS OF CANS AND ANALYSIS OF PREFORMS BLOWING
Cans:
We also offer a seam sight, which analyzes the can seaming .The measurement is done automatically by an ultra-accurate camera. The data is stored together with the images of the measurements. (software is provided with the SEAM analysis SIGHT monitor)
Saws for cutting seams are also available (ANSS = anti noise seam saw)
Cup bottle:
The HWBC (hot wire cutter bottle) allows accurate cutting of PET bottles after blowing. This allows the analysis of the distribution of the material during blow molding by weighing after cutting.
Copyright © 2002-2023 艾特易仪器设备有限公司 版权所有 备案号:粤ICP备17000932号网站地图