Can measuring equipment | Our products | Home AT2E | Torque test and quality control for packaging and beverage

PTG-1 板料厚度测定仪

PTG-1板料厚度测定仪用于快速测量板料厚度。独特设计，更加方便操作员快速精确地测量板料的厚度。为避免人工记录读数及人为误差，仪器可通过DTB-1传输器和数据线连接到SPC系统或AT2E的“SeamCheck”软件，以便将数据直接传输至SPC系统或“SeamCheck”软件。

details

Can measuring equipment , Dimensional control equipment for cans 2020/1/3 10:28:03

LTE-1 Leak Tester for End

LTE-1 is used to determine the pressure at which ends buckle. This tester is also used to test for pin hole leaks in the tab score and rivet area.

details

Can measuring equipment , End Testing 2019/9/26 17:21:01

The STR-1 Seam Stripper is designed for quick cutting and stripping the double seam of both aluminum and steel cans in a single motion. Thanks to the unique configuration of the roller cutters, only the cover hook will be cut. The body hook and cover hook are

details

Can measuring equipment , End Testing 2019/9/5 16:57:31

CDDG-1 Can Dome Depth Gauge

CDDG-1 Can Dome Depth Gauge is specifically designed for measuring the dome depth of beverage can. With AT2E’s ingenious design, its applicable for various sizes of cans without changing any parts.

details

Can measuring equipment , Dimensional control equipment for cans 2019/9/5 16:55:08

SRG-1 Score Residue Gauge

AT2E SRG-1 Score residue gauge is used to measure the score residue of can ends.

details

Can measuring equipment , End Testing 2019/9/5 14:30:44

CEBT-1 Can and End Buckle Tester

The AT2E CEBT-1 Can and End Buckle Tester was designed for testing the pressure resistance performance of the can dome and ends, it can also perform the missile test for ends. Full automated design, just press the start button after the sample was placed,

details

Can measuring equipment , End Testing 2019/9/5 12:00:07

PATT-1 Pop and Tear Tester

AT2E PATT-1 Pop and Tear Tester provides a complete solution for easy open ends inspection. It is able to measure the pop and tear force of different types of easy open end with different test modes. It has been widely used in can, food and beverage industry.&

details

Can measuring equipment , End Testing 2019/9/5 11:54:38

CLA-ECO Can Leak Analyzer (3 positions)

CLA-ECO Can Leak Analyzer is specifically designed for analyzing the secure seal ability of the empty 3-pieces tinplate cans. Water bath design with free rotating can holders allows a 360° observation on the can body (especially welding position) for air bu

details

Can measuring equipment , Can Leak Analyzer 2018/1/5 12:04:43

SeamCheck Automatic Double Seam Projector

Seaming quality is critical and important for can inspection. And it’s the one of the most concerned point for can, beverage and food manufacturing companies. AT2E SeamCheck Automatic Double Seam Projector provides the most convenient way to accomplish

details

Can measuring equipment , Seam projector 2018/4/13 12:13:37

ANSS - Antinoise Seaming Cutting Saw

The Antinoise Seaming Cutting Saw is a saw with a noise resistant design and a double blade for double seaming inspections. It has been specially designed for 2-pcs can and 3-pcs can (65 mm diameter or less).

details

Can measuring equipment , Seam saw 2018/4/13 12:14:10