Strength pull off cap tester. Inquiry

Strength pull off cap tester.

POT-1 has been studied and developed to be able to open step by step the pull off caps for carbonated beverages.
The POT-1 includes an accurate dynamometer tester and semi-automatic cycle.
Angle of the both steps is adjustable. And it’s been designed for testing different height of bottle with cap.

Features:

  • Easy to use
  • High repeatability in testing
  • Built-in dynamometer with software


Step to perform test:

  • Install the hook on the cap ring and the wire into the lower position rail.
  • Move the pneumatic valve to testing position and the pull system will test at a stable speed and dynamometer will measure the force.
  • Change the wire from lower position to higher (this position is set at 45° but can be changed)
  • Move the pneumatic valve to testing position and the pull system will test at a stable speed and dynamometer will measure the force
  • Return the system to the initial position and start a new test.


Dynamometers specifications:

  • Range: 50 / 200 / 1000 N (Please specify when ordering)
  • Measure tensile & compressive strain
  • Digital display and reversible
  • Programming menu. 
  • Measurement Mode Continuous / Peak / PC Link
  • Recalibration of the zero touch
  • Accuracy: 0.05 N
  • Display threshold (limit)
  • Choice of unit: kgf. / Lbf / N
  • Integrated battery with charge
  • Data will be transferred to the software with curve

Machanical specifications :
  • Dimensions: 500 x 250 x 600 mm 
  • Net weight: 15 KG